3D Printing: Will Personalized Medical Devices Be The Next Big Thing?
This article was originally published in The Gray Sheet
Executive Summary
Medical device manufacturers have a growing interest in 3D printing, a technology that could upend the manufacturing and distribution of certain medical devices and expand the scope of personalized medicine – especially in orthopedics, where it's used for some models, implants, and surgical cutting guides.
You may also be interested in...
Market Intel: EU Ortho Close-Up: Rising, But Varying Orthopedic/Spinal Opportunities In 5 European Markets
A rising and more active aging population, and a growing incidence of osteoporosis fractures and back pain – as well as other spine-related issues – are paving the way for companies to bring innovative devices into the hands of orthopedic and spinal surgeons in Spain, Italy, Germany, the UK and France. In this feature, we take a closer look at the prevailing surgical approaches and techniques for selected fracture fixation, spinal surgery procedures, joint replacement, and arthroscopy procedures in each of the five major EU countries, as outlined in a new Meddevicetracker report. We also take a deep dive into the various growth opportunities of select procedures in each EU market and discuss trends.
J&J Taps Aspect Biosystem's 3D Printing Tech For Meniscus Implant
3D bioprinting and tissue engineering specialist Aspect Biosystems has entered a research collaboration with Johnson & Johnson's DePuy Synthes to create bioprinted knee meniscus tissue suitable for surgical therapy. It is one of more than 50 commercial and academic partnerships J&J has entered to develop complementary technologies and materials for its medical devices.
FDA Tackles 3-D Printing Considerations In Draft Guidance
A draft guidance issued by FDA on additive manufacturing, or 3-D printing, of medical devices is meant to be a starting point for an industry that is growing exponentially. The document outlines recommendations on topics such as device design, software considerations and material testing requirements.