Medtech Insight is part of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC’s registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

This copy is for your personal, non-commercial use. For high-quality copies or electronic reprints for distribution to colleagues or customers, please call +44 (0) 20 3377 3183

Printed By

UsernamePublicRestriction
UsernamePublicRestriction

Manufacturers Tell FDA, Don’t Forget Hospitals’ Role In Device Reprocessing

This article was originally published in The Gray Sheet

Executive Summary

Manufacturers want FDA to emphasize hospitals' responsibility for following labeling instructions for reprocessing reusable devices.

You may also be interested in...



Lumened Device Designs Should Facilitate Reprocessing – FDA/AAMI Meeting

Manufacturers of reusable devices with lumens and difficult-to-reach channels should design them so that they can more easily be disassembled for cleaning and subsequently reassembled, according to participants at a recent medical device reprocessing summit.

Lumened Device Designs Should Facilitate Reprocessing – FDA/AAMI Meeting

Manufacturers of reusable devices with lumens and difficult-to-reach channels should design them so that they can more easily be disassembled for cleaning and subsequently reassembled, according to participants at a recent medical device reprocessing summit.

Cleaning And Sterilization Needs Require Closer Attention By Reusable Device Makers – FDA

With the increasing mechanical complexity of devices that are intended to be reused by hospitals, the challenge is getting steeper for manufacturers to design the products and provide appropriate instructions to allow proper cleaning and sterilization, an FDA official stressed at a recent meeting.

Topics

UsernamePublicRestriction

Register

SC143429

Ask The Analyst

Ask the Analyst is free for subscribers.  Submit your question and one of our analysts will be in touch.

Your question has been successfully sent to the email address below and we will get back as soon as possible. my@email.address.

All fields are required.

Please make sure all fields are completed.

Please make sure you have filled out all fields

Please make sure you have filled out all fields

Please enter a valid e-mail address

Please enter a valid Phone Number

Ask your question to our analysts

Cancel