Medtech Insight is part of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC’s registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

This copy is for your personal, non-commercial use. For high-quality copies or electronic reprints for distribution to colleagues or customers, please call +44 (0) 20 3377 3183

Printed By

UsernamePublicRestriction
UsernamePublicRestriction

PerkinElmer

This article was originally published in The Gray Sheet

Executive Summary

Neonatal screening kits produced at the firm's Norton, Ohio plant are subject to additional FDA testing and labeling requirements, per a Feb. 13 agreement with the agency allowing the resumption of production. The plant is slated to shut in approximately six months, with all manufacturing to be consolidated at a Turku, Finland site. U.S. marshals seized nearly $1 mil. in kits Feb. 4, due to a lack of response to QSR violations (1"The Gray Sheet" Feb. 9, 2004, p. 16)...

You may also be interested in...



PerkinElmer Neonatal IVD Seizure Attributed To Poor Documentation

Recent staff turnover at PerkinElmer's Norton, Ohio manufacturing site partly accounted for a failure to address QSR violations that prompted seizure of neonatal screening kits, according to the firm

Market Intel: Minimally Invasive Procedures Gaining Traction In BPH Treatment Market

Less-invasive technologies to treat benign prostatic hyperplasia are fast becoming viable alternatives to medication and surgery. Landmark studies of newer techniques have led the American Urological Association to update its guidelines.

Innovo Incontinence Device Goes OTC In US, Labeled To Be Worn For 30 Minutes

Atlantic Therapeutics estimates that one in three women are incontinent, but 60% don’t ask their health care providers about treatment, a statistic that supports offering Innovo OTC less than two years after it launched Rx in the US.
UsernamePublicRestriction

Register

MT019802

Ask The Analyst

Please Note: You can also Click below Link for Ask the Analyst
Ask The Analyst

Your question has been successfully sent to the email address below and we will get back as soon as possible. my@email.address.

All fields are required.

Please make sure all fields are completed.

Please make sure you have filled out all fields

Please make sure you have filled out all fields

Please enter a valid e-mail address

Please enter a valid Phone Number

Ask your question to our analysts

Cancel